1 Menu - Charts
- IT PT
- Tachospeed
1. Scan the charts
1.1 Scanning
This option allows you to scan charts using an A4 flatbed scanner. We recommend using Canon LiDE scanners (Chapter 3 Scanners for charts). In order for the charts to be scanned correctly, the resolution should be set to 300 DPI, "read radius length" to 370 and "scan color quality" to "black and white 1bit".
Note: Brightness, Contrast and Sensitivity settings vary depending on the scanner you have.
1.2 Arrangement of chart on the scanner
Most often, 6 charts of one driver are scanned at the same time, as this allows you to analyze the working time of the entire week. The charts should be arranged on the scanner according to the given scheme.
For example, if you want to scan one chart, position it on the scanner in the lower left corner with the so-called "teardrop" to the right, starting from the scanning bar at the bottom of the scanner (in the case of the Canon Lide 25 scanner). For scanners with the scanning bar at the top of the scanner, it will be the opposite position, i.e. the top left corner with the "teardrop" pointing to the left.
To enter three charts at the same time, position them on the scanner as follows:
2. Open 1 chart from a file
After selecting this option, we indicate the chart image on the computer, which is then added to the program. Supported shield image formats are BMP, PNG, TIF, JPG.
3. Open 6 chart from a file
After selecting this option, we indicate the image of six charts on the computer, which we then add to the program. Supported image formats of the dials are BMP, PNG, TIF, JPG.