1. Introduction
The "Interactive View" is accessed from the main window in Tachospeed.
Select a data range, driver or vehicle, and then click on the "Refresh" button.
Note: Viewing data for a vehicle is only available with the "extended control module" activated.
On the right side of the screen there is a panel showing detailed activities of the driver on the selected day. If there are violations of the driver in the loaded time period, they will be indicated in the "Violations" tab (by clicking on it with the left mouse button, the program will redirect us directly to the day on which it occurred). To generate a detailed report for these violations click on the "Infringements report" or "RTD inspection report" button.
2. Data display
If a tachograph file has been imported then we can also preview the vehicle data. To do so, check the "Vehicles" checkbox. If the drivers drove in a crew, we can preview the data of two drivers by checking the "Crew" checkbox.
3. Editing data
In the "Interactive View" we have the possibility to edit the data by clicking on the "Edit" button.
Then point to any driver activity and right-click to bring up the selection window.
Zamień na pracę inną / gotowość / postój - The program will replace the indicated activity with another one.
Delete all - usunięcie wcześniej zmienionych stanów aktywności.
Zaznacz / odznacz błąd selektora - dodanie błędu selektora dla kierowcy.
Zaznacz / odznacz "poza zakresem" - wstawianie trybu OUT dla danej aktywności.
Delete all - usunięcie wprowadzonego trybu OUT.
Wstaw / usuń znacznik promu/kolei - Adding and removing tags.
Delete all - usunięcie wprowadzonego znacznika promu/kolei.
Using the "Undo" and "Redo" buttons, we can easily restore the changes we made earlier.
4. Keyboard shortcuts
In the "Interactive View" we have a number of keyboard shortcuts, and their description is always available by hovering the mouse cursor over the question mark "?".
LMB - To select a single activity just click on it once with the left mouse button.
CTRL+LMB - to select several activities that are not adjacent to each other, we use CONTROL + left mouse button combination.
SHIFT+MOVE - to select a longer segment of time we use SHIFT + left mouse button combination.
SHIFT+ALT+LMB - To select any section of time we use the combination SHIFT + ALT + left mouse button.
We can then check all selected activities in the "Selection" tab.
CTRL+CIRCLE/A/Z - While holding CONTROL on the keyboard, use the WHEEL on the mouse or the A or Z keys to zoom in and out.
The maximum zoom provides a minute-by-minute view of activity.
The maximum distance represents data over several days.
ALT+MOVE - To scroll through activities hold the ALT button on the keyboard, and then make a mouse movement using the left button. It is possible to scroll through activities for more than one day.
