Wersja Multi programu Tachospeed jest to wersja wielostanowiskowa, która umożliwia jednoczesną pracę kilku użytkownikom. Aby można było pracować w taki sposób, konieczne jest podłączenie komputerów w sieci LAN. Instalacją wersji Multi powinien zająć się przeszkolony pracownik z zakresu sieci informatycznych. Zazwyczaj jest to administrator sieci lub główny informatyk.
Wersja Multi składa się z wersji serwerowej oraz klienckiej. Wersja serwerowa powinna pracować na komputerze ogólnodostępnym dla wszystkich stacji klienckich. Wersja kliencka nie działa bez podłączenia do sieci, w której zainstalowana jest baza danych.
Aby programy klienckie działały, wystarczy, że uruchomiony jest serwer Firebird (nie musi być uruchomiona wersja serwerowa Tachospeed`a). Dzięki takiemu rozwiązaniu jednocześnie może działać kilka stanowisk, a co za tym idzie – kilku użytkowników. Wersja kliencka działa również przez version of Tachospeed is a multi-user version that allows several users to work simultaneously. In order to work in such a way, it is necessary to connect computers in a LAN. Installation of the Multi version should be handled by a trained employee in the field of IT networks. Usually this is a network administrator or chief information officer.
The Multi version consists of a server version and a client version. The server version should run on a computer open to all client stations. The client version does not work without connection to the network where the database is installed.
For the client programs to work, it is enough that the Firebird server is running (the server version of Tachospeed does not have to be running). Thanks to this solution, several workstations, and therefore several users, can run simultaneously. The client version also works over the Internet (DSL, Neostrada, Chello, itdetc.) ale wymagany jest tylko stały zewnętrzny adres IP serwerabut only a permanent external server IP address is required.
Installation of the server version
Program instalujemy "jako administrator" przy wyłączonym antywirusie. Najpierw zawsze instaluje się wersję serwerową. Instalacja przebiega tak samo, jak w przypadku wersji jednostanowiskowej, z tą różnicą, że po zakończeniu instalacji wersji serwerowej programu instalacyjnego automatycznie uruchamia się instalacja serwera Install the program "as administrator" with the antivirus disabled. The server version is always installed first. The installation proceeds in the same way as for the single-station version, except that after the installation of the server version of the installer is completed, the installation of the Firebird 2.0.7 (tylko ten numer wersji). Podczas instalacji serwera server is automatically started (only this version number). When installing Firebird 2.0.7 muszą być włączone opcje: używaj Guardiana oraz uruchom jako usługa. Aby serwer server, the options: use Guardian and run as a service must be enabled. In order for the Firebird 2.0.7 działał poprawnie, na komputerze serwera musi być odblokowany server to work properly, port 3050 (TCP) . Po instalacji należy ponownie uruchomić komputer. W przypadku, gdy nie jest to możliwe, wystarczy ręcznie uruchomić usługę serwera Firebird (opis dostępny jest w instrukcji serwera Firebirdmust be unlocked on the server computer. After installation, restart the computer. In case this is not possible, just start the Firebird server service manually (a description is available in the Firebird server manual).
Now you can proceed to launch Tachospeed. After launching the server version, a window will appear:
...